WoodworkerHelp is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Best Table Saw Blades to Buy In 2020 | Top 10 Picks

Best Table Saw BladesTable saws are the most productive tools you could have in your woodworking collection. But you need the right blade for the tool to be efficient.

Everything has variations nowadays, so you can’t just go to the store and get any blade you want for your table saw – you really have to know your stuff.

And this may sound intimidating now, but really, it’s just a matter of understanding the different types of blades. We’ll help you with that here.

In this article, we have a list of the best table saw blades available in the market now.

Give it a read; we’re pretty sure one of these high-quality blades will prove to be exactly what you were looking for.

1. Forrest WW10407125 Woodworker

Forrest WW10407125 WoodworkerThis blade is good for both rip cuts and crosscuts. And the most satisfying thing about this blade is that it will smoothen out the edges so much that it will appear as if they have been sanded.

The kerf of the blade is 1/8 inches, which is quite ideal for thick hardwood.

This thickness is ideal because it will remain stable while you’re cutting through the wood – stability will make it resistant to breakage. And so, you will notice that you are being able to finish cutting your boards faster, owing to this freedom of working the saw fearlessly through the board.

The hook angle of this blade is 20 degrees, while the angle of the top bevel is 15 degrees. There are about 40 teeth on this blade, and with such specifications, we can assure you that the cuts will be quite clean from the get-go. This will save you a lot of time as well as effort. 

To mount the blade atop the table saw, the arbor has to be about 5/8 inches. Well, with all these features of the blade, we can easily say that it will be quite a delight for you to use this blade on your table saw.

Highlighted Features

  • The diameter of the blade is 10 inches, and this needs to be an exact match with your table saw for a secure fit
  • Arbor requirement is 5/8 inches
  • Blade layout is ATB, and so the blade is ideal for hardwood planks
  • 1/8 inches of kerf width will produce very little wood shavings
  • A total of 40 teeth will produce clean cuts that don’t need much sanding or shaping later

2. IRWIN Marples 10-Inch Miter / Table Saw Blade

IRWIN Marples 10-Inch Miter / Table Saw BladeThis one comes with a blade of 10 inches in diameter. With these blades, you will have the freedom to take projects involving thick hardwood

Moreover, this is a thin blade, which means that it also has thin kerfs. You are going to prefer these thin kerf blades if you are looking to get more precise cuts on the wood, and have a bit of time at hand to spare.

The small gullet space of these thin kerf blades is good because they run through more millimeters of the wood, and thus they can offer cleaner cuts. 

This blade is ideal for a saw that generates energy less than 3 horsepower. So, it is meant for regular use – wood that is too bulky will not be a good idea for these blades.

Another thing that will help in the cuts is the tooth configuration of this blade, which is an ATB system. This means that the bevels of the teeth are alternatively directed in opposite directions in a way that enables their sharper edges to protrude outwards and make more defined cuts.  

Highlighted Features

  • Thin kerf blades that make very precise cuts on the wood
  • Alternative tooth bevels make the process faster while giving a smoother finish to the parts that are being cut.
  • Good for general purpose as they can cut wood of all levels of hardness
  • Coated with a heat-resisting non-stick element that prevents wood shavings from sticking to the surface of the blades
  • Long-lasting blades that can be sharpened and reused over and over again 

3. DEWALT 10-Inch Miter / Table Saw Blade

DEWALT 10-Inch Miter / Table Saw BladeNow comes a blade with a higher number of teeth than any of the ones discussed so far. It has about 60 teeth, and this means that it will produce very clean cuts through the wood, but at the cost of speed. That is to say that the blade will be perfect for you if you want to do little work while maintaining superb quality.

The more densely packed set of teeth will give you clean cuts that won’t need much sanding before further processing. In this regard, you will see that you are indeed able to save a bit of time from the overall duration for the completion of the project.

Another unique aspect of this blade is that it has been digitally tweaked with a computer to make it produce fewer vibrations during the operations. This added feature will end up giving you more control over the project, while also enabling the blade to be in top condition for many years.

The whole blade is made of high-quality steel, and much of this steel is put in a concentrated amount to create the wedges on the blade so as to promote more accuracy in the cuts.

Highlighted Features

  • Only suitable for crosscutting
  • Has a diameter of 10 inches which is the ideal blade size for most table saws
  • Uses a thin kerf blade that puts less strain on the motor and keeps the saw healthier for longer
  • 60 teeth arranged in an ATB layout will ensure very fine cuts
  • The blade has specially balanced teeth that reduce the number of vibrations produced by the machine

4. Freud 10" x 40T Next Generation General Purpose Blade

Freud 10 Inch x 40T Next Generation Premier Fusion General Purpose BladeAll blades discussed above had the same ATB layout. But if you are looking for something that will give you finer cuts than ATB blades, then look at these ones with the Hi-ATB configuration. These are intended to give you cuts that are finer and cleaner all throughout.

There are 40 teeth on this blade, which is on the lower spectrum of teeth count for these blades. So, this is the simplest of the HI-ATB blades, but you can still count on it to cut you anything from plywood to melamine.

You can refer to the mechanism of this blade by the words, Fusion Trio. Well, it’s as simple as it sounds – it’s the power of three features all built into this one package. There is the 30-degree bevel angle of the HI-ATB that will help the blade to cut effortlessly through such tough materials, as mentioned above.

Then there is the dual-grind design that will polish up the cuts as they are being made, and thirdly, you will have the sheer grind on the axial faces of the blade, which will give the cutting a certain pace and have it fly through the material with the least resistance.

With all these specifications, we can say that this blade really is extremely efficient, and is hands down the best table saw blade for plywood.

Highlighted Features

  • Has a HI-ATB layout that is hard to beat in terms of the production of fine cuts on hard materials
  • Fusion Trio mechanism will save the day by helping you to power through projects one after another with superb results
  • The bevels have a 30-degree tilt which allows them to dig right into the material with maximum point force
  • Low amount of resistance on the blade will make it capable of lasting many long years
  • Drag force on the blade is reduced by the use of a permanent shield of a non-sticking element that is coated on the surface

5. Bosch DCB1060 Daredevil 10-Inch 60-Tooth Fine Finish Circular Saw Blade

Bosch DCB1060 Daredevil 10-Inch 60-Tooth Fine Finish Circular Saw BladeOne of the main problems you will face with circular saw blades is that they tend to get deformed. But being made of a special hard-steel saves this blade from being vulnerable to such strains. The plate of the blade is highly enduring, and this helps it to hold its shape even when it’s being rammed into the hardwood. 

The alternative teeth bevels make it easier for the blade to cut smoothly. These blades will create the perfectly defined crosscuts that won’t need much post-sawing correction at all. But unfortunately, this blade is not as suitable for ripping.

This is a blade with long life, and this life is ensured by the use of the C3 carbide tipping on the blade teeth. C3 carbide has very fine grains that are densely packed together to make the blade capable of enduring high levels of heat and strain without losing its sharpness.

As a result of this natural aptitude to retain its sharpness, you will find that each of these blades will last much longer and stay effective for much longer periods, even with extensive use.

During sawing operations, there is a lot of heat energy produced between the blade and the wood – this energy could cause the blade to become fragile. But the body of this blade is slotted in an angle that reduces its contact with heat, and this goes further to vouch for the longevity of the blade.

Highlighted Features

  • Very sharp triple-edged ATB teeth that adds smoothness to every cut
  • There are 60-teeth on the blade to ensure that the finish is smooth and the cutting is precise
  • An especially hard-steel has been used to make the blade resist deflection or breakage
  • The micro grains of the C3 carbide used on the teeth make sure that the blade retains its sharpness and resists being deformed under pressure
  • A special speed coating has been used on the steel to prevent wood shavings from sticking on to the blade

6. Makita A-93681 Micro Polished Mitersaw Blade

Makita A-93681 Micro Polished Mitersaw BladeIsn’t it a major inconvenience to have to sand wooden blocks after they have been cut? The process is quite a bland activity, and it takes an unnecessarily long time to finish. But the saw blade we have here presents a good solution for this.

Unlike the regular blades found in the market, the teeth on this one are made with carbide teeth that have a fine grid of 600.

The micro grains on the teeth of this saw blade are sharpened to a grit level of 600. With this, you will be able to get the finest finish on the wooden blocks you cut. No need to get the cumbersome sandpaper out for the final finish.

The steel that is used on this blade was developed by stretching and hardening, to make sure that it doesn’t get deformed under pressure. The hooking angle of the blade is 5 degrees, and the kerf is 0.091 inches. Due to the ultra-thinness of the kerf, the blade will be able to make very precise cuts on the wood without wasting too much wood.    

This blade is ideal for low-powered machines, but it can cut anything from hardwood, plywood, and softwood without any trouble.

Highlighted Features

  • The perfect blade for fine crosscutting
  • Uses a very thin kerf to produce precise and clean cuts
  • Can be used on any type of wood from hardwood, softwood to plywood
  • Keeps wastage to a minimum and does not make a mess with the wood shavings
  • The teeth are made with a micro-grain carbide that gives a mirror-like finish to the wood

7. CMT 250.024.10 ITK Industrial Rip Saw Blade

CMT 250.024.10 ITK Industrial Rip Saw BladeIf you want to work fast, this blade will be good for you. It has a thin kerf design, but it has a higher hooking angle of 20 degrees, and this will give it a boost in terms of performance. You will be able to make rip cuts with this blade on both hardwood and softwood without wasting much wood.

The kerf has a thickness of 0.098 inches, and this is quite healthy for regular table saws that do not have a high-powered motor installed inside. The teeth are a combination of FT and ATB, and this is exactly why it has versatility in function.

Micro-grain carbide has been used to make the teeth because of which, the blade is able to retain its sharpness for long periods even after being used quite frequently.

Another feature that helps the longevity of this blade is the slots that have been cut into the blade with the use of lasers. These miniature holes distribute the impact of the force throughout the blade and reduce the amount of vibrations created on it.   

Highlighted Features

  • Makes fast rip cuts without wasting too much wood
  • A very thin kerf has been used to make the blade cut more precisely
  • Combination teeth are used to enhance the versatility of the blade with different types of wood without losing quality
  • Experience fewer vibrations due to the expansion holes cut into the body of the blade
  • The micro-grain carbide teeth help the blade to retain its sharpness

8. SKIL 75128 Carbide-Tipped 28-Tooth Circular Saw Blade

SKIL 75128 Carbide-Tipped 28-Tooth Circular Saw BladeCarbide blade is about 60 times more durable than blades that are made entirely of steel. This is why the tips of the teeth on this blade are made of carbide. It is a steel that has much more hardness than regular steel.

It also has more grit to it than other steel, which is why it’s ideal for the tips. The fine grits subsequently keep the blade sharp for longer periods. And even if the blade gets dull, you will be able to re-sharpen it and boost its performance quite quickly.

Moreover, an ATB layout has been used on the blade to give it speed and haste while making cuts through different types of composite and wood.

There are 28 teeth on the blade, and the diameter of the blade is 10 inches. Now, as you can tell, the kerf on the teeth of this blade will be quite narrow. It is perfectly suitable to produce longitudinal framing at great speeds, but if you want fine cutting, then this is not the blade for it.

Highlighted Features

  • The blade has 28 teeth that make cutting a fast and easy process
  • The blade has an ATB layout which produces clean cuts without a mess
  • Produces a lot of wood wastage because of the large teeth
  • Does not produce rip cuts but very good for cross-cutting
  • Teeth are made of tungsten-carbide that helps it to stay sharp even with the use

9. Oshlun SBW-100050 10-Inch 50 Tooth 4 and 1 Combination Saw Blade

Oshlun SBW-100050 10-Inch 50 Tooth 4 and 1 Combination Saw BladeIf you are a general user, then it should be an easy choice for you to get this blade. It uses a combination of ATB and FTG on the grind, which makes it quite suitable for any kind of wood you want to work on. Starting from particle board to hardwood, this blade will be able to handle it all.

On top of having a combination of two types of teeth on the layout, this blade has an anti-kickback mechanism that prevents jamming due to excessive wood shavings being caught into the gullet. You won’t need to spend too much time in keeping the blade clean.

One thing you will enjoy with the combination blades is the freedom to make both rip cuts and crosscuts of great quality. There are 50 teeth on this blade, and this will help it to make cuts that are not that clean but not that rough either. It’s the perfect middle ground for general users; you are going to feel quite fulfilled with the performance of this blade.

Highlighted Features

  • Has 4 sets of ATB and then one set of FTG teeth to make it suitable for both types of cuts
  • Carbide steel is used on the tips to ensure sharpness and efficiency
  • The teeth have a high hooking angle which will help it to cling on to the wood and be more stable
  • Deformation is prevented by the high tensile strength of the steel
  • 50 teeth evenly spaced out on a blade that is 10 inches in diameter

10. Toolman Premium Multifunctional Carbide-Tipped Circular Saw Blade

Toolman Premium Multifunctional Carbide-Tipped Circular Saw BladeThe edges of this blade are colored black, and this is one way in which this blade stands out from the rest. Another way it stands out is through its performance. 

This blade has quite a thin kerf to it, which allows it to make very fine cuts on any piece of wood. The wood loss is kept to a minimum, and the mess of wood waste is further controlled by the use of a nitro-shield on the surface. This shield is a non-stick coating that helps the blade to stay clean by preventing wood shavings from clinging on to it.

You will be able to cut both lumber and plywood with this blade with accuracy and ease.

The teeth have been coated with a C3 level of carbide steel, which can endure high levels of pressure without deteriorating in quality. 

In between the teeth, this blade has a cooling slot that allows heat to escape fast and keep noise levels at a minimum.

If you want efficiency in performance and longevity to use, then this blade will be perfect for you.

Highlighted Features

  • The blade is good for creating crosscuts and rip cuts alike
  • There is a cooling slot on the blade that allows it to have lower vibrations and produce less noise during running operations
  • Blade has a non-stick coating that prevents wood shavings from clinging to it
  • Teeth have been made with a C3 grade carbide that is able to retain its sharpness for a long time
  • Blade body has been heat-treated to make it more durable

Buying Guide for Table Saw Blades 

There are many types of saws, and they each will require a specific type of blade. It's no good to get the best table saw blade for woodworking from the market if it doesn't suit the main tool. Look at the factors mentioned below, and learn about them before you make a purchase.

Size of the Blade

This is a no-brainer, really. But we mention it to remind you because many people forget to get the right measurement, and they come home with a standard blade, only to make a trip back to the store to get a replacement because there is no universal blade that will fit all types of table saws from the market.

To give you an estimate, most table saws use blades that are either 10 inches or 12 inches in diameter.

However, the correct blade size for your particular table saw will be mentioned in the specifications marked on the packet. If you don’t find it, you have to measure the diameter for the blade area from the tool itself – only when you have a size in mind can you go to the store to look at blades.

Type of Cuts 

There are two types of cuts – rip cuts and crosscuts. Rip cuts are those cuts that are parallel to the direction of grains – these can be made quickly, but they are not smooth cuts. Crosscuts, on the other hand, are cuts that are made across the direction of grains.

For rip cuts, get blades that have few and large teeth. Blades with 24, 50, or 60 teeth are ideal. In the case of crosscuts, get blades that have more teeth, but the teeth are smaller in size. Blades with about 40, 50, or up to 80 teeth are ideal.

Remember that blades that have small teeth and a lot of teeth will make cleaner cuts, but they’ll be slow. Whereas, blades with large but few teeth are going to cut through the wood fast, but they will produce rough cuts.

You can also find combination blades – few but big teeth on some parts of the blade, and some other parts with teeth that are big in size and but more in number. Get these if you want the table saw for more general use, rather than for a particular type of cut.

The layout of the Blades

There are five layouts – FT, ATB, HI-ATB, TCG, and comb.

FT means flat tip; it's both for softwood and hardwood. These cut fast and will prevent wood splintering and ripping to the minimum. ATB is an alternative top bevel. These give cleaner cuts on particle boards, natural wood, and veneer plywood.

HI-ATB blades are quite similar to ATB blades, but they can produce cleaner and finer cuts. The bevels have a steeper angle, and thus they can produce sharper cuts than regular ATB. Thus, they are ideal for wood that has a melamine coating and is more prone to breakage.

TCG means a triple chip grind. These are meant for very hard materials like laminated flooring, aluminum, and the hardest wood. These are equipped to take large amounts of strain, and so they can last longer than most other blades.

The comb is, of course, a combination blade. They are average in quality and will be able to make rip cuts and crosscuts on a multitude of materials as long as they are not too extreme on the hardness meter.  

The Kerf of Right Measure 

Kerf is the width of the cut that the saw blade will make on wood. 

If you are working with small pieces of wood, you will want precision. In this case, opt for thinner blades. Usually, thin blades will produce a kerf of about 3/32 inches. These blades also leave behind wood shavings in more density. So, they are ideal if you want to collect wood shavings for use later.

Thick blades have a kerf measure of about 1/8 inches.

Kerf and Power

Use thin blades with table saws that use lower than 3 horsepower, so that the engine doesn’t get overstrained while getting the blades to move.

If you have an engine that has a horsepower of 3 or more, then you can use blades of any thickness.

Quality of the Blades 

Try not to get cheap blades if you are looking for long-term use. They will break, or bend and render the saw useless.

For more longevity, get blades that have expansion holes, or other anti-vibration mechanisms – they will reduce the twisting of the blades and help them last longer. 

FAQs For Table Saw Blades

If you have any questions about these blades, then feel free to ask. But first, take a look to see whether they have already been answered below.

Q: How does the number of teeth affect cutting?

Ans: Teeth tell us whether the cuts would be smooth or rough. More teeth will give a smoother finish, and a few teeth give a rougher finish.

Q: How long does each of these blades last?

Ans: Depending on the quality of the blade and the frequency of use, some blades last for a few months, while some may even last for years.

Q: How to clean the blades? 

Ans: Use a cleaning agent to make a cleaning solution first. Then remove the blade, soak it into the solution for a few minutes, and then scrub the gullets very carefully.

Q: What size of the blade should I buy for general woodwork?

Ans: A diameter of 10 inches is enough for general projects.

Q: Should I resharpen the blade or get a new one?

Ans: Resharpen it. It will save the motor and also save you a bit of money.

Conclusion

Well, that’s the end then. We hope this article was able to give you a general idea on the best table saw blades you can find in the market nowadays.

The difference between these blades is very negligible, so you really have to sift carefully to find the blade that will serve you well with any projects that might fall to your hands. Best of luck!

Leave a Comment

shares