Jobsite VS Contractor Table Saw: A World of Difference!

Jobsite VS Contractor Table SawLearning about table saw before you get one is the most appreciated thing by me and I always recommend this to new buyers.

Whether you are a mere beginner starting woodworking and DIY stuff or an intermediate level professional, table saws are going to take a huge place in your activities.

So being completely aware of what type literally fits the best with your needs is a priority that you can’t avoid. And on that approach, I’m here writing a very delicate comparison on two common table saw types. We are about to discuss on Jobsite vs contractor table saw.

Jobsite VS Contractor Table Saw:

Breaking Down Both Types, Who They Suit Best & Choosing the Right Type.

When I started woodworking, lack of research and my own ignorance bought me a totally wrong type of table saw that absolutely not well.

And so, based on portability and functionality, you need to at least have the most basic ideas about table saw types. There are different options available when you want to consider a portable table saw.

Or maybe if you are a bit more serious and don’t want to risk the lack of additional features in a portable version, a hybrid table saw can work.

Well, all of these will still sound confusing unless we dig deep. So, what are we waiting for?

General Classification.

There could be a lot of classification happening based on what exact feature you are focusing on. Based on functionality, portability, power, sharpness and so many more things you can find distancing options. However, a novice might not need to go that complex.

So, If I have to be straightforward then there are two types you need to know about as a beginner. Portable And stationary table saw. Basically, Jobsite and contractor table saw fall right under these two types.

By the way, cabinet and hybrid table saws are totally out of this whole thing. They are more like the complicated versions that of course have far more features to offer. We’ll talk about them on a different day. Let’s focus on the two general types for now.

Easy to Carry, Use & Live With – The Motto of a Jobsite AKA Portable Table Saw.

Now don’t get me wrong. I know there are more than a few portable table saws available. But Jobsite table saw is one of the most popular and used type available within this category. And so, I wanted to call it that way.

The major benefits of portable table saws are that these are pretty easy and simple to lift. You can have them anywhere moving around freely. That’s why the design really attracts those who need to travel a lot for their jobs.

Of course, there are lots of functions embedded with these, but mostly basics. You can expect them to work on a smaller scale of large table saws.

There’s no weighty motor, instead of a simple lightweight universal one. And thanks to that, you find it much easier to use. But then again, don’t expect the big muscle jobs to be done using these. Some even say that Jobsite tables saws are fairly loud.

Most of these come with an aluminum top. And so, the top and motor combo is a bit of a hitching thing for highly experienced folks. You are also going to compromise durability for the very same reason of simple manufacturing. Some of the models also show troubles with vibration and not being enough stable.

However, you surely can expect a viable working ability needed for woodworking. Carpenters are the most beneficial professionals from such types of table saws. Ripping jobs and sheet material cutting are some of the most commonly done tasks with a Jobsite table saw.

But they fail to impress when it comes to ripping hardwoods. And that’s quite obvious because the design itself is not meant for meeting fine woodworking demands. But for the basics, they are excellent!

Who Should Get Them?

  • Those who look for versatility can definitely give these a try. They are the most ideal blend of portability and functionality that even impresses professionals.
  • If you need something strong than benchtop saw but not as powerful as stationary types, these are fine choices.
  • Suitable for folks who are always on a run due to professional demands on job sites. Because heavier saws are not carriable easily and benchtops will fail to meet certain tasks.
  • Home woodworkers will find it affordable and enough for their tasks.
  • Anybody who already owns a stationary type of table saw can have a spared one. And a Jobsite portable table saw fits right exactly that category for being able to bring features like portability and simplicity that stationary types fails to provide.

Balance Between Portability & Power – Contractor’s Saw Enters the Chat!

Originally the contractor saws were meant to be carried from one site to another jobsite. Well, that’s quite possible with a few models available. These are also much cheaper in pricing. However, you can’t expect them to carry as easily as portable ones.

If you contrast between different types of stationary saws, you’ll find the contractor’s version weighting relatively less. This is certainly a benefit point for those who want to have hardcore cutting power but then again not with an extremely weighty table saw.

In maximum models you will gladly find the solid cast iron tabletop. Also, there are open webbed extension wings glowing the design. These also use materials such as stamped metal or cast iron. You will notice that the arbor assembly, gearing, and trunnions are less husky. This is why they are also relatively less expensive.

Some of the models also facilitate detachable motor. Usually, you will notice the power part handing off saw’s back. And originally these are often attached to arbor assembly. A single V-belt keeps the connection tight.

If you want to make the purchase affordable with a stationary version then the contractor’s table saw can open doors for such wish. I’m not saying they are less expensive than Jobsite versions or capable to deal just like the heavy stationary ones.

But still, you are finding a balance between both worlds and maybe, that’s exactly what your projects need. It’s actually up to you.

Also, there’s high-quality fence system that is seen in recent contactor table saw models. Being able to get specially designed blades for a specific type of cut is another pro point you don’t want to miss for advanced woodworking jobs. With excellent stability and anti-vibration features, contractor’s saw is truly admirable.

Who Should Get Them?

  • These are perfect for huge carpentry jobs and trim works as well. Furniture making becomes easier with contractor’s table saw thanks to the fence system.
  • Anybody who has serious projects going on will find the contractor’s table saw a perfect companion.
  • Homeowners who deal with complicating woodworking tasks at home will love it too.
  • Those who wish to move onto a stationary table saw but want to try something similar tasting while not spending much.

Figuring Out What You Need?

Simple said than done, right? But don’t worry, that’s going to get sort out too. I’m however hoping you have made your mind on whether a jobsite table saw will help you or the contractor’s version sounds more appealing. But even if you are not, I understand.

I’ll suggest you to start with focusing on your projects. How much strength of cutting it demands, you need to consider that? And then you should think about a budget in your mind. If you are deciding with the jobsite table saw, then probably price won’t be a much of hassle. But that’s not exactly the case with contractor’s table saw and you already know why.

Are you someone who hardly spends any time in the shop? Even if you do, it’s probably on pretty mini projects and cabinetry making tasks? In such cases, Jobsite table saws are the way to go for you.

But if you fall in the group where a comfortable and reliable run of table saw for hours is necessary, then think about a good quality contractor’s version.

In short, with added portability, you will leave out some usage, precession and power points. While when you don’t want to miss them out, weights are going to get added. The variations are sheer! You will have to look into both ends of spectrum to make a choice. And sometimes you need to travel through everything between the spectrum as well.

Conclusion

Making a choice between jobsite vs contractor table saw, is depended on your feature demands, cutting ability needs and portability requirements.

I’m not declaring one particular type being the best for everyone. Because that’s not true and there’s a reason why both of these types exist. And you need to find out those reasons to figure out if they match with what you’re looking for. So that, the right candidate for you could possibly be chosen and that’s how things are going to work in a practical way.

No matter what type, table saws are pretty much big investment. And so, your considerations actually have to be careful. Don’t waste your money due to lack of research. Do your homework, read reviews and contrast the specs of different models. Make sure you get the most out of your money.

Happy Woodworking!

Leave a Comment

shares